View LC320W01-SL13_4150292.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1/30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 title 32.0? wxga tft lcd buyer model supplier lg.philips lcd co., ltd. *model lc320w01 *when you obtain standard approval, please use the above model name without suffix suffix sl13 signature date j.h lee / senior manager h.s song / manager d.e kim / engineer tv product development dept. lg. philips lcd co., ltd ) ) ( ( final specification preliminary specification please return 1 copy for your confirmation with your signature and comments. / / / signature date approved by for approval specification reviewed by prepared by approved by www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 2/30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 number item page cover 1 3-2 interface connections 8 14 9 precautions 27 9-1 mounting precautions 27 9-2 operating precautions 27 9-3 electrostatic di scharge control 28 9-4 precautions for strong light exposure 28 9-5 storage 28 9-6 handling precautions for protection film 28 3-5 color input data reference 7-2 emc 25 8 packing 26 8-1 designation of lot mark 26 8-2 packing form 26 contents 2 record of revisions 3 1 general description 4 2 absolute maximum ratings 5 3 electrical specifications 6 3-1 electrical characteristics 6 3-3 signal timing specifications 12 3-4 signal timing waveforms 13 3-6 power sequence 15 4 optical specifications 17 5 mechanical characteristics 21 6 reliability 24 7 international standards 25 7-1 safety 25 contents www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 3/30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 revision no revision date page description 0.0 oct. 9, 2006 - preliminary specification 0.1 oct. 19, 2006 25 changed international standard 26 changed the package quantity in one box : 5pcs 6pcs changed the box size : 880mm(w)x500mm(d)x570mm(h) 848mm(w)x494mm(d)x539mm(h) 30,31,33 changed the appendix- , , for the packing specification. record of revisions www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 4/30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 general features active screen size 31.51 inches(800.4mm) diagonal outline dimension 760.0 mm(h) x 450.0 mm(v) x 48.0 mm(d) (typ.) pixel pitch 170.25 ? x 510.75 ? x rgb pixel format 1366 horiz. by 768 vert. pixels rgb stripe arrangement color depth 8bit, 16,7 m colors dynamic c/r (for ai) 1200:1 (typ.) viewing angle (cr>10) viewing angle free ( r/l 178(typ.), u/d 178(typ.)) luminance, white 500 cd/m 2 (center 1 point) (typ.) power consumption total 89.4watt (typ.) (logic=5.4 w, lamp=84w [i bl =90ma] ) weight 6,900 g (typ.) display operating mode transmissive mode, normally black surface treatment hard coating(3h), anti-glare treatment of the front polarizer 1. general description the lc320w01 is a color active matrix liquid crystal display with an integral external electrode fluorescent lamp(e e fl) backlight system. the matrix employs a-si thin film transistor as the active element. it is a transmissive type display operating in the normally black mode. it has a 31.51 inch diagonally measured active display area with wxga resolution (768 vertical by 1366 horizontal pixel ar r ay). each pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of more than 16.7m(true) colors. it has been designed to apply the 8-bit 1-port lvds interface. it is intended to support lcd tv, pctv where high brightness, super wide viewing angle, high color gamut, high color depth and fast response time are important. cn1 (30pin) lvds 5pair power circuit block +12.0v cn4 lut data select #9 dcr_enable #10 v br_ext #27 v br_out #28 lut data source driver circuit tft - lcd panel (1366 rgb 768 pixels) g1 s1 s1366 g768 rgb(mini-lvds) gate driver circuit lvds rx (receiver) dcr controller odc controller timing controller dcr lut, odc lut +24.0v +24.0v back light assembly (18eefl) cn2, inverter (master, 12pin, high) cn3, inverter (slaver, 12pin, high) pld www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 5/30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 table 1. absolute maximum ratings value parameter min max unit lcm backlight inverter v bl 21.6 +27.0 v dc brightness control voltage v br 0 +5.0 v dc operating temperature t op 0 +40 c note 1,2 v lcd -0.3 +14.0 v dc on/off control voltage von/off -0.3 +5.25 v dc storage temperature t st -20 +50 c operating ambient humidity h op 10 90 %rh storage humidity h st 10 90 %rh power input voltage remark symbol at 25 2 c 2. absolute maximum ratings the following items are maximum values which, if exceeded, may cause faulty operation or damage to the lcd module. note 1. temperature and relative humidity range are shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. 2. ambient illuminance should be more than 10 lux. temperature and relative humidity 90% 10 20 30 40 50 60 70 80 0 -20 0 10 20 30 40 50 dry bulb temperature [ c] wet bulb temperature [ ] storage operation humidity [(%)rh] 10% 40% 60% 60 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 6/30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 table 2-1. electrical characteristics mosaic pattern(8 x 6) white : 255gray black : 0gray 3. electrical specifications 3-1. electrical characteristics it requires two power inputs. one is employed to power for the lcd circuit. the other input power for the eefl/backlight is to power inverter. notes : 1. the specified current and power consumption are under the v lcd =12.0v, 25 2 c, f v =60hz condition whereas mosaic pattern(8 x 6) is displayed and f v is the frame frequency. 2. the cur r ent is specified at the maximum cur r ent pattern. 3. the duration of rush current is about 2ms and rising time of power input is 1ms (min.). value parameter symbol min typ max module : power input voltage v lcd 11.4 12.0 12.6 v dc permissible input ripple voltage v rp - - 200 mv p-p - 450 580 ma 1 power consumption p lcd - 5.4 7.0 watt 1 rush current i rush - - 3.0 a 3 power input current i lcd - 570 740 ma 2 unit note www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 7/30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 table 2-2. electrical characteristics value parameter symbol min typ max inverter : power input voltage v bl 22.8 24.0 25.2 v dc 1 power consumption p bl - 84 92.4 w1 lamp : 25 2 50,000 60,000 hrs 3 life time brightness adjust v br 03 . 3 v dc 2 input voltage for control system signals power input current i bl -3.53.85 a1 on v on 3.0 5.0 5.25 v dc on/off off v off -0.3 0 0.8 v dc unit note minimum brightness.(30%) 0v maximum brightness (100%) 3.3v function v br voltage note : 1. the specified current and power consumption are under the typical supply input voltage, 24.0v. ripple voltage of the power input voltage is under 0.2 vp-p. 2. brightness control. this v br voltage control brightness. 3. specified values are for a single lamp which is aligned horizontally. the life time is determined as the time at which brightness of the lamp is 50% compared to that of initial value at the typical lamp current on condition of continuous operating at each ambient temperature. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 8/30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 3-2. interface connections this lcd module employs two kinds of interface c onnection, a 30-pin connector is used for the module electronics and two 12-pin connectors are used for the integral backlight system. table 3. module connector(cn1) pin configuration - lcd connector(cn1) : fi-x30ssl-hf (manufactured by jae) or equivalent - mating connector : fi-30c2l (manufactured by jae) or equivalent 3-2-1. lcd module pin no. symbol description note 2 vlcd power supply +12.0v 11 gnd ground 12 ra- lvds receiver signal(-) 13 ra+ lvds receiver signal(+) 14 gnd ground 15 rb- lvds receiver signal(-) 21 rclk- lvds receiver clock signal(-) 22 rclk+ lvds receiver clock signal(+) 23 gnd ground 24 rd- lvds receiver signal(-) 25 rd+ lvds receiver signal(+) 28 vbr_ext external vbr input from system to lcd module 29 gnd ground 30 gnd ground 2 3 vlcd power supply +12.0v 4 vlcd power supply +12.0v 5 gnd ground 6 gnd ground 7 gnd ground 8 gnd ground 9 select select lvds data format 1 10 dcr enable dynamic cr enable ( ? gnd ? = disable , ? 3.3v ? = enable ) page.29 16 rb+ lvds receiver signal(+) 17 gnd ground 18 rc- lvds receiver signal(-) 19 rc+ lvds receiver signal(+) 20 gnd ground 26 gnd ground 27 vbr_out vbr output form lcd module 1 vlcd power supply +12.0v note: 1. if the pin no. 9 is ground, interface format is ?lg?, and if the pin no. 9 is vcc(3.3v), interface format is ?dism?. see page 9 and 10. 2. the pin no. 30 is necessary for lcd test. when lvds signals are abnormal operation more than 3-vsync times and power 12v is supplied, ?open? or ?vcc? : lcd operate itself some test patterns.(agp ? auto generation pattern) ?ground? : lcd operate itself a black pattern. (nsb ? no signal black) lpl recommend ?ground? for nsb. 4. all gnd (ground) pins should be connected together, which should be also connected to the lcd module?s metal frame. 5. all v lcd (power input) pins should be connected together. 6. input levels of lvds signals are based on the iea 664 standard. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 9/30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 note: 1. the lcd module uses a 100 ohm [ ] resistor between positive and negative lines of each receiver input. 2. refer to lvds transmitter data sheet for detail descriptions. (ds90c385 or compatible ) 3. ?7? means msb and ?0? means lsb at r,g,b pixel data. red0 red1 red2 red3 red4 red5 red6 red7 green0 green1 green2 green3 green4 green5 green6 green7 blue0 blue1 blue2 blue3 blue4 blue5 blue6 blue7 hsync vsync data enable clock host system 24 bit txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ txout3- txout3+ 51 52 54 55 56 3 50 2 4 6 7 11 12 14 8 10 15 19 20 22 23 24 16 18 27 28 30 31 ds90c385 or compatible 12 13 15 16 18 19 21 22 24 25 9 30 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ rxin3- rxin3+ lg / dism lcd test 100? 100? 100? 100? 100? 48 47 46 45 42 41 40 39 38 37 fi-x30ssl-hf timing controller lcd module table 4. required signal assignment for lvds transmitter ( pin9=?l? or ?open? ) gnd gnd www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 10 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 table 5. required signal assignment for lvds transmitter ( pin9=?h? ) red0 red1 red2 red3 red4 red5 red6 red7 green0 green1 green2 green3 green4 green5 green6 green7 blue0 blue1 blue2 blue3 blue4 blue5 blue6 blue7 hsync vsync data enable clock host system 24 bit txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ txout3- txout3+ ds90c385 or compatible 12 13 15 16 18 19 21 22 24 25 9 30 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ rxin3- rxin3+ lg / dism lcd test 100? 100? 100? 100? 100? 48 47 46 45 42 41 40 39 38 37 fi-x30ssl-hf timing controller lcd module vcc gnd 50 2 51 52 54 55 56 3 8 10 4 6 7 11 12 14 16 18 15 19 20 22 23 24 27 28 30 31 note: 1. the lcd module uses a 100 ohm [ ] resistor between positive and negative lines of each receiver input. 2. refer to lvds transmitter data sheet for detail descriptions. (ds90c385 or compatible ) 3. ?7? means msb and ?0? means lsb at r,g,b pixel data. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 11 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 table 6. inverter connector pin configulation 3-2-2. backlight inverter note : 1. gnd should be connected to the lcd module?s metal frame. 2. minimum brightness : v br = 0.0v maximum brightness : v br = 3.3v 3. v on : 3.0 ~ 5.0v v off : -0.3 ~ 0.8v pin no symbol description master slave v bl v bl v bl v bl v bl v bl gnd gnd gnd gnd gnd don?t care 12 on/off 0v ~ 5.0v on/off don?t care 3 option pin(lamp open status detection) 1 gnd power gnd gnd 2 status upper 3.0v(normal), under 0.7v(abnormal) status v bl v bl v bl v bl gnd gnd gnd gnd gnd v br note 1 v bl power supply +24.0v 2 v bl power supply +24.0v 3 v bl power supply +24.0v 4 v bl power supply +24.0v 5 v bl power supply +24.0v 6 gnd power gnd 7 gnd power gnd 2 8 gnd power gnd 9 gnd power gnd 10 gnd power gnd 1 11 v br 0v ~ 3.3v pcb 1 2 3 12 11 top bottom component side input connector 1 1 2 status connector lower input connector -inverter connector : s12b-pha-sm3(manufactured by jst) or equivalent -mating connector : phr-12 or equivalent status connector -inverter connector : s2b-ph-sm3-tb(manufactured by jst) or equivalent -mating connector : phr-2(manufactured by jst) or equivalent upper www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 12 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 item symbol min typ max unit remark period t clk 12.5 13.8 14.7 ns frequency - 68 72.3 80 mhz period t hp 1456 1528 1776 t clk frequency f h 45 47.4 50 khz width t wh 832 - t clk t hp frequency f v 47 60 63 hz horizontal back porch t hbp 24 80 - horizontal blank - t hp- t hv 162 t hp- t hv vertical blank - t vp- t vv 22 t vp- t vv t clk vertical back porch t vbp 415 - t hp horizontal front porch t hfp 24 48 - vertical valid t vv 768 768 768 vertical front porch t vfp 12 - width t wv 25 - hsync period t vp 775 790 1063 t hp note 1) pal : 47~53hz ntsc : 57~63hz vsync horizontal valid t hv 1366 1366 1366 de (data enable) dclk 3-3. signal timing specifications this is the signal timing required at the input of the lvds transmitter. all of the interface signal timing should be satisfied with the following specification for it?s proper operation. table 7. timing table note : hsync period and hsync width should be even number times of tclk. if the value is odd number times of tclk, display control signal can be asynchronous. in order to operate the lcd, hsync, vsync and de(data enable) signals should be used. 1. the performance of the electro-optical characteristics may be influenced by variance of the vertical refresh rate. 2. vsync and hsync should be keep the above specification. 3. timing should be set based on clock frequency. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 13 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 0.7vdd 0.3vdd t clk invalid data valid data pixel 0,0 pixel 2,0 pixel 1,0 pixel 3,0 valid data invalid data invalid data invalid data de(data enable) 0.5 vdd t hp t hbp t hv t hfp t vp t wv t vbp t vv t vfp hsync vsync de(data enable) de(data enable) t wh dclk first data second data hsync, vsync, de, data 3-4. signal timing waveforms www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 14 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 table 8. color data reference note : users should be input true 8 bi t data streams via lvds transmitter. input color data red msb lsb green msb lsb blue msb lsb black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (255) green (255) blue (255) cyan magenta yellow white red (000) dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (000) dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 green ... ... ... ... green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 red (001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red ... ... ... ... red (254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (000) dark blue (001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ... ... ... ... blue (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 blue (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue 3-5. color data reference the brightness of each primary color(re d,green,blue) is based on the 8-bit gray scale data input for the color the higher the binary input, the brighter the color. the below table provides a reference for color versus data input. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 15 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 3-6. power sequence 3-6-1. lcd driving circuit interface signal (tx) power for lamp power supply for lcd v lcd 10% 0v 90% 90% 10% t 1 t 2 t 5 t 6 t 7 t 3 t 4 valid data lamp on t 8 t 9 option signal (dism, dcr_enable) value parameter min typ max t1 1.0 - 20 ms t2 5.0 - 50 ms t6 - - 300 ms t7 2.0 - - s t8 0 < t8 < t2 ms t9 0 < t9 < t5 ms t3 200 - - ms ms t4 200 - - t5 0.5 - 50 ms unit table 9. power sequence note : 1. please avoid floating state of interface signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply v lcd to 0v. 3. the case when the t2/t5 exceed maximum specification, it operates protection pattern(black pattern) till valid signal inputted. there is no reliability problem. 4. the t3/t4 is recommended value, the case when failed to meet a minimum specification, abnormal display would be shown. there is no reliability problem. 5. if the on time of option signal(dism or dcr_enable) precedes the on time of power(v lcd ), check the lcd logic power(vcc) is under 0.8v, otherwise it will be happened abnormal display. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 16 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 3-6-2. on/off for inverter v on/off v br power supply for inverter v bl 0v 90% t 1 t 2 10% t 3 t 2 0.7v t 4 t 4 24v (typ.) 0 v v bl t6 v bl (typ) x 0.85 3-6-3. deep condition for inverter t 5 lamp on v bl : 24v note : 1. t1 describes rising time of 0v to 24v and is not applied at restarting time. 3. when v bl (24v) is supplied always, there is no reliability problem. 4. t4(max) is less than t2. 5.in t7 section, it recommended that vbr = max. values parameter min typ max remarks t1 20 - - ms 1 2 t4 0 - - ms 4, 5 t5 10 - - ms t6 - - 10 ms v bl (typ) x 0.85 t7 1000 - - ms t2 500 - - ms t3 200 - - ms units table 10. power sequence for inverter 1000ms(min) t 7 1000ms(min) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 17 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 table 11. optical characteristics ta= 25 2 c , v lcd =12.0v, f v =60hz, dclk=72.3mhz, v br =3.3v lcd module optical stage(x,y) pritchard 880 or equivalent 50cm fig. 1 optical characteristic measurement equipment and method 4. optical specification optical characteristics are determined after the unit has been ?on? and stable in a dark environment at 25 2 c. the values are specified at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . it is presented additional information concerning the measurement equipment and method in fig. 1. value parameter symbol min typ max unit note cr 400 600 1 decay time tr d 10 14 without ai 6 gray scale with ai contrast ratio surface luminance, white l wh 400 500 cd/m 2 2 luminance variation white 5p 1.3 3 rise time tr r - 8 12 g to g red gx 0.280 green blue white viewing angle (cr>10) x axis, right( =0 ) r 85 89 - x axis, left ( =180 ) y axis, up ( =90 ) y axis, down ( =270 ) l 85 89 - u 85 89 - d 85 89 - degree 5 gy 0.605 bx 0.145 by 0.065 wx 0.285 wy 0.293 - 9 14 ms 4 rx 0.640 ry 0.343 typ +0.03 typ -0.03 color coordinates [cie1931] response time (gray to gray) cr with ai 800 1200 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 18 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 note : 1. contrast ratio(cr) is defined mathematically as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels it is measured at center 1-point. 2. surface luminance( l wh ) is the luminance value at center 1-point across the lcd surface 50cm from the surface with all pixels displaying white. for more information see the fig. 2. 3. the variation of surface luminance , white is defined as : white(5p) = maximum(l on1 ,l on2 , l on3 , l on4 , l on5 ) / minimum(l on1 ,l on2 , l on3 , l on4 , l on5 ) where l on1 to l on5 are the luminance with all pixels displaying white at 5 locations . for more information, see the fig. 2. 4. response time is the time required for the display to transition from g(n) to g(m) (rise time, tr r ) and from g(m) to g(n) (decay time, tr d ). for additional information see the fig. 3. (n product specification 19 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 measuring point for surface luminance & measuring point for luminance variation fig. 2 the position of points for luminance measure a : h / 4 mm b : v / 4 mm h : 697.685 mm v : 392.256 mm @ h,v : active area h a v b response time is defined as the following figure and sh all be measured by switching the input signal for ?gray(n)? and ?gray(m)?. fig. 3 response time gray(m) gray(n) t r r t r d 100 90 10 0 optical response n,m = 0(black)~255(white), n product specification 20 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 fig. 4 viewing angle dimension of viewing angle range normal y e = 0 , right = 180 , left = 270 , down = 90 , up www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 21 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 horizontal 760.0mm vertical 450.0 mm vertical 398.4mm vertical 392.256mm weight 6,900 g(typ.), 7,240 g(max) surface treatment hard coating(3h) anti-glare treatment of the front polarizer depth 48.0 mm horizontal 703.8mm horizontal 697.685mm active display area bezel area outline dimension notes : please refer to a mechanic drawing in terms of tolerance at the next page. 5. mechanical characteristics the following items provide general mechanical characterist ics. in addition, the figures in the next page show the detail information of mechanical drawing for lcd module. table 13. mechanical characteristics www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 22 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 23 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 24 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 6. reliability no. test item condition 1 high temperature storage test ta= 50 c 240h 2 low temperature storage test ta= -20 c 240h 3 high temperature operation test ta= 40 c 50%rh 240h 4 low temperature operation test ta= 0 c 240h 5 vibration test (operating) wave form : random vibration level : 1.0grms bandwidth : 10-300hz duration : x,y,z, 30 min one time each direction 6 shock test (operating) shock level : 100grms waveform : half sine wave, 2ms direction : x, y, z one time each direction 7 humidity condition operation ta= 40 c 90%rh 240h 8 altitude operating storage / shipment 0 - 14,000 feet(4267.2m) 0 - 40,000 feet(12192m) table 14. environment test condition www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 25 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 7. international standards 7-1. safety a) ul 60065, 7 th edition, dated june 30, 2003, underwriters laboratories, inc., standard for audio, video and similar electronic apparatus. b) can/csa c22.2, no. 60065:03, canadian standards association, standard for audio, video and similar electronic apparatus. c) iec60065:2001, 7 th edition cb-scheme and en 60065:2002, safety requirements for audio, video and similar electronic apparatus.. 7-2. emc a) ansi c63.4 ?methods of measurement of radio- noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. ?american national standards institute(ansi), 1992 b) cispr22 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? international special committee on radio interference. c) en 55022 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? european committee for electrotechnical standardization.(cenelec), 1998 ( including a1: 2000 ) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 26 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 8. packing 8-2. packing form 8-1. designation of lot mark a) lot mark abcdefghi jklm a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 321 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 321 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is attached to the backside of the lcd module. this is subject to change without prior notice. a) package quantity in one box : 6 pcs b) box size : 848mm(w) x 494mm(d) x 539mm(h) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 27 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to the module. and the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plat e to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzine. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possib le. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. (7) please do not give any mechanical and/or acoustical impact to lcm. otherwise, lcm can?t be operated its full characteristics perfectly. (8) a screw which is fastened up the steels should be a machine screw. (if not, it causes metallic foreign material and deal lcm a fatal blow) (9) please do not set lcd on its edge. 9. precautions www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 28 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wris t band etc. and don?t touch interface pin directly. 9-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9-4. precautions for strong light exposure when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. 9-5. storage 9-6. handling precautions for protection film (1) the protection film is attached to the bezel with a small masking tape . when the protection film is peeled off, static electricity is generated betw een the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion- blown equipment or in such a condition, etc. (2) when the module with protection film attached is st ored for a long time, sometimes there remains a very small amount of glue still on the bezel af ter the protection film is peeled off. (3) you can remove the glue easily. when the glue remains on the bezel surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal- hexane. 9-7. appropriate condition for public display - generally large-sized lcd modules are designed for consumer applications (tv). accordingly, a long-term display like in public displa y (pd) application, can cause uneven display including image sticking. to optimize module's lifetime and function, several operating usages are required. 1. normal operating condition - temperature: 0 ~ 40 - operating ambient humidity : 10 ~ 90 % - display pattern: dynamic pattern (real display) note) long-term static display can cause image sticking. 2. operating usages under abnormal condition1 a. ambient condition - well-ventilated place is recommended to set up pd system. b. power and screen save - periodical power-off or screen save is needed after long-term display.[3.2)] www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 29 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 3. operating usages to protect against image sticking due to long-term static display a. suitable operating time: under 18 hours a day. b. static information display recommended to use with moving image. - cycling display between 5 minutes' information(static) display and 10 seconds' moving image. c. background and character (image) color change - use different colors for background and character, respectively. - change colors themselves periodically. d. avoid combination of background and character with large different luminance. 1) abnormal condition just means c onditions except normal condition. 2) black image or moving image is strongly recommended as a screen save. 4. lifetime in this spec. is guaranteed only when pd is used according to operating usages. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 30 /30 lc320w01 liquid crystal display ver. 0.1 oct. 19, 2006 ? the attached figure of the ai_e nable circuit block diagram on the control pcb ass?y fig.5 the ai_enable circuit block diagram ai_enable (user cnt #10 pin) vcc 100 ? 60k ? 3k ? inside the timing controller on the control pcb ass?y www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LC320W01-SL13

	To Download LC320W01-SL13 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .